>>Test terminal blocks are applied in measurement and contro equipments to realize all connections of secondary circuits in current transformer. The sliding plate with captive slide nut is provided between the two connection screws, high short curent withstand, its advantages: save space, few accessories needed. easily installed, switching circuit is clearly legible.
| Order No. | 01025 | |||
| Dimensions | ||||
| Width x Length x Height | (mm) | 64/6.2/46.8 | ||
| Nominal screw diameter | (mm) | M3 | ||
| Torque | (Nm) | 0.5-0.7 | ||
| Stripping Length | (mm) | 8 | ||
| Parameter | ||||
| Voltage Rating | (V) | 800 | ||
| Current Rating | (A) | 32 | ||
| Wire section | (mm²) | 4 | ||
| Wire Range | ||||
| Rigidity wire range | (mm²) | 1.5-4 | ||
| Soft wire range | (mm²) | 1.5-4 | ||
| DIN Rails | Type | Order No. | ||
| Mountable rail type |  |
G32-15L G32-18/15 |
02006 02007 |
|
| TH35-7.5 | 02005 | |||
| End clapboard | ||||
 |
SKJ-4/2×2G | 01032 | ||
| Clapboard | ||||
| For electric separation of neighboring bridges, can be fitted later, no loss of pitch. |
 |
SKJ-G(TS-K) | 01030 | |
| Compensation room clapboard | ||||
| Laid out with common terminal, compen sating for the staggered space. |
 |
|||
| Internal Jupmer | ||||
| Used for transversely bridge conn- ected in the center of terminal block, according to actual operation the voltage can be distributed. |
10 pole |  |
SFBI 10-6 | 01041 |
| 3 pole | ||||
| 2 pole | ||||
| External Jumper | ||||
| 2 pole |  |
SEB 2-6 | 01058 | |
| 3 pole | SEB 3-6 | 01076 | ||
| 10 pole | SEB 10-6 | 01052 | ||
| Mark Tag | ||||
| Blank |  |
SZB6-10 | 01065 | |
| 10 no. Horz. |  |
SZB6 (Horizontal) | ||
| 10 no. Vert. |  |
SZB6 (Vertical) | ||
PREV
Clean Our Workshop
NEXT
NULL
GET A QUOTE
English
中文
English
Pусский
Français
Español
