SKJ-35 resistor terminal block is specially designed for resistors in electrical connections, ensuring stable access and current distribution of resistors. Its high-quality materials and precision design reduce contact resistance and heat accumulation, and are suitable for industrial control systems that require precise resistance adjustment.
lntroduction
>> "SKJ" Series Universal Rail Mounting Standard Screw Clamp Feed through terminal blocks, have useful features as follows:
>> The terminal can be mounted on U type railway TH35-7.5 and G type railway G32-15L、G32-18. the closed screw guiding hole can make it easy operate screwdriver.
>>The universal accessories provided for terminals with several cross sectional area, e.g. clapboard, grouping plate, etc.
>>Potential distribution can be realized through connecting to fixed central jumper or inserting into side jumper.
>> Ground terminal and N line terminal with same figure of universal terminals, will be marked with SZB combined digital number for uniform identif-ication.
Order No. | 01008 | |||
Dimensions | ||||
Width x Length x Height | (mm) | 50.5/15.2/61 | ||
Nominal screw diameter | (mm) | M6 | ||
Torque | (Nm) | 3.2-3.7 | ||
Stripping Length | (mm) | 16 | ||
Parameter | ||||
Voltage Rating | (V) | 800 | ||
Current Rating | (A) | 150 | ||
Wire section | (mm²) | 35 | ||
Wire Range | ||||
Rigidity wire range | (mm²) | 0.75-50 | ||
Soft wire range | (mm²) | 0.75-35 | ||
DIN Rails | Type | Order No. | ||
Mountable rail type | G32-15L G32-18/15 |
02006 02007 |
||
TH35-7.5 | 02005 | |||
End clapboard | ||||
Clapboard | ||||
For electric separation of neighboring bridges, can be fitted later, no loss of pitch. |
SKJ-G(TS-K) | 01030 | ||
Compensation room clapboard | ||||
Laid out with common terminal, compen sating for the staggered space. |
||||
Internal Jupmer | ||||
Used for transversely bridge conn- ected in the center of terminal block, according to actual operation the voltage can be distributed. |
10 pole | SFBI 10-15 | 01112 | |
3 pole | SFBI 2-15 | 01048 | ||
2 pole | SFBI 3-15 | 01046 | ||
External Jumper | ||||
2 pole | ||||
3 pole | ||||
10 pole | ||||
Mark Tag | ||||
Blank | SZB10-10 | 01067 | ||
10 no. Horz. | SZB10 (Horizontal) | |||
10 no. Vert. | SZB10 (Vertical) |
PREV
Clean Our Workshop
NEXT
NULL
GET A QUOTE