SKJ-2.512-2E Mini Type Double Level Terminal Blocks has won the favor of the market with its powerful functions. It adopts a double-layer design, which effectively saves installation space and supports the access of wires of various specifications. This terminal block is suitable for circuit connection of various precision instruments and electronic equipment.

lntroduction

>>Small size terminal block is suitable for mounting on TH15-5.5, liaison can be done in the middle of terminal, two sides marked with quick label SZB, maxi cross sectional area of cable to be connected up to 10mm² realize maxi optimization between space, current and cable cross section area.

>>Small size double- layer terminal block SKJ-2.5/2-2E is developed, it consummates SKJ series of products lts features:

>>Low height, save space.

>>Double wiring layer, more cable connection available.

>>Half terminal thickness is staggered between upper layer and downside layer lengthways, downside wiring can be done easily, and cable layout is clear. The space compensating plate SKJ-2.5/2-2EDg used on two sides of terminal block can fill the interleaving space, which make common terminal can directly lay out adjacent with this double layer terminal block.

>>Fixing bridge connector and test socket can be used in SKJ-2.5/2-2 terminal block, after that, utilize clapboard to perform electric isolation and become visual, no railway space will be occupied.

Parameters

Dimensions
Width x Length x Height		(mm)	62.2/5.2/47.5
Nominal screw diameter		(mm)	M3
Torque		(Nm)	0.5-0.6
Stripping Length		(mm)	7
Parameter
Voltage Rating		(V)	800
Current Rating		(A)	32
Wire section		(mm²)	2.5
Wire Range
Rigidity wire range		(mm²)	1.0-4
Soft wire range		(mm²)	1.0-2.5
DIN Rails			Type	Order No.
Mountable rail type			TH35-7.5	2005
			TH15-5.5	2020
End clapboard
			SKJ2.5/2-2EG	13003
Clapboard
For electric separation of neighboring			SKJ-4/2×2GP	1034
bridges, can be fitted later, no loss of pitch.
Compensation room clapboard
Laid out with common terminal, compen			SKJ-2.5/2-2EDG	13004
sating for the staggered space.
Internal Jupmer
Used for transversely bridge conn-	10 pole		SFBI 10-5E	1040
ected in the center of terminal block,
according to actual operation the	3 pole
voltage can be distributed.	2 pole
External Jumper
2 pole			SEB2-5	1057
3 pole			SEB3-5	1075
10 pole			SEB10-5	1051
Mark Tag
Blank			SZB5-10	1064
10 no. Horz.			SZB5 (Horizontal)
10 no. Vert.			SZB5 (Vertical)