SKJ-16JD Multi-conductor Terminal Blocks are designed for high-density wiring requirements. The terminal block supports the connection of up to 16 conductors and is widely used in electronic control systems, mechanical equipment and other fields, providing a reliable solution for complex circuit connections.

lntroduction

>>Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time.

>>Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DlN Rail.

>>The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail.

>>Ground blocks can also be used as end stops preventing other terminal blocks and components from moving laterally on the DlN Rail.

>>They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags.

Parameters

Order No.			01016
Dimensions
Width x Length x Height		(mm)	42.5/12.2/53
Nominal screw diameter		(mm)	M4
Torque		(Nm)	1.5-1.8
Stripping Length		(mm)	11
Parameter
Voltage Rating		(V)
Current Rating		(A)
Wire section		(mm²)	16
Wire Range
Rigidity wire range		(mm²)	2.5-25
Soft wire range		(mm²)	4-16
DIN Rails			Type	Order No.
Mountable rail type			G32-15L G32-18/15	02006 02007
			TH35-7.5	02005
Mark Tag
Blank			SZB10-10	01067
10 no. Horz.			SZB10 (Horizontal)
10 no. Vert.			SZB10 (Vertical)