SKJ-10RD/X Frame Terminal Block is suitable for large current and high voltage electrical connections and is widely used in power systems, industrial automation production lines, etc. Its X-frame design improves the stability and load-bearing capacity of the structure.

lntroduction

>>SKJ-4RD/X, 4RD, 2.5RD/X, 2.5RD are the disconnected rotating arm type fuse test terminal, the rotating arm can be opened upside, and fixed on final position, fuse can be installed inside rotating arm, these terminals can provide light indicator or without.

>>SKJ-10RD, 10RD/X are screw cap type fuse terminal, fuse can be 5X20mm, 5X25mm, bridged by used of central jumper SFBl 10-12, two kinds of model: with or without light indicator, the one with indicator will light if fuse blown down.

>>Notices: the terminal shall be chosen according to maxi power consumption of fuse (itself temper-ature). Check heating status of fuse terminal based application and mounting modes, at that case of higher temperature, it may give extra burden to fuse, if so, please consider regulating (reducing) rated working current.

Parameters

Order No.			01023
Dimensions
Width x Length x Height		(mm)	62.4/12.2/56
Nominal screw diameter		(mm)	M4
Torque		(Nm)	1.2-1.8
Stripping Length		(mm)	11
Parameter
Voltage Rating		(V)	800
Current Rating		(A)	10
Wire section		(mm²)	10
Wire Range
Rigidity wire range		(mm²)	0.5-16
Soft wire range		(mm²)	0.5-16
DIN Rails			Type	Order No.
Mountable rail type			G32-15L G32-18/15	02006 02007
			TH35-7.5	02005
End clapboard
			SKJ-2.5RDG	01080
Clapboard
For electric separation of neighboring bridges, can be fitted later, no loss of pitch.
Compensation room clapboard
Laid out with common terminal, compen sating for the staggered space.
Internal Jupmer
Used for transversely bridge conn- ected in the center of terminal block, according to actual operation the voltage can be distributed.	10 pole		SFBI 10-12	01044
	3 pole
	2 pole
External Jumper
2 pole
3 pole
10 pole
Mark Tag
Blank			SZB8-10	01067
10 no. Horz.			SZB8 (Horizontal)
10 no. Vert.			SZB8 (Vertical)
			G Fuse type 5×20	01068